Astral Drift

Step 1: Unbox Carefully

Open the package and gently remove each part of the product. Lay them flat on a table and identify the three lines: the 5-bead line, the 4-bead line, and 3-bead line.

Tip: Place a soft cloth on the table first to protect the glass beads from scratches or damage.

Step 2: Locate the Wall Brackets

Find the metal brackets inside the three wooden sleeves included in the box. Choose the spot on the wall where you want to hang the artwork.

Important: Leave at least 6 feet of unobstructed space below the installation point.

Refer to the diagram below for the maximum recommended spacing between the three bead lines. You can adjust the spacing to suit your wall and swap the position of each line to create the composition you prefer.

Step 3: Mark the Holes

Hold a bracket against the wall and mark the screw holes with a pencil.

Important: Make sure the hole in the metal pipe is facing upward (as shown in the image below). This is key for proper alignment.

Step 4: Drill and Insert Anchors

Drill holes at the marked points, then insert the provided wall anchors. Wipe away any dust or pencil marks.

Step 5: Mount the Brackets

Attach all metal brackets to the wall using the included screws. Make sure they are secure and level.

Step 6: Attach the Wooden Sleeves

Press each wooden sleeve firmly onto its wall bracket until it fits securely in place. Align it so the hole in the pipe is pointing upward.

Step 7: Secure and Straighten

Insert and tighten the top screw to connect the wooden sleeves to the brackets. Finally, straighten the ropes so the beads hang cleanly and evenly.

Tip: It’s best to have an extra set of hands to support the rope and the weight of the glass while you screw in the wooden sleeve. Once secured, wrap the rope neatly around the sleeve.

Step 8: Arrange the Glass Beads

Once the artwork is securely installed, use the small Allen key from your accessories bag to adjust the position of each element. Spread the glass beads evenly to your liking.

Tip: To match the arrangement shown on our website, use the measurements indicated in the drawing below.

Replacing elements

Exchanging the wooden sleeve

Swapping glass beads