Ceramic Beads Installation Guide

Follow these simple steps to install your product safely and correctly.

Step 1: Unbox Carefully

Open the package and gently remove the product. Place it flat and straight on a table.
Tip: Lay down a soft cloth first to protect the glass beads from scratches or damage.

Step 2: Adjust the Height

Use the included Allen key to loosen the rope locking elements. Adjust the height of the product to your preference, then tighten the locks securely to hold the ropes in place.

Step 3: Locate the Wall Bracket

Find the metal bracket inside the wooden sleeve included in the packaging. Choose the spot on the wall where you want to hang the product.

Step 4: Mark the Holes

Hold the bracket against the wall and mark the screw holes with a pencil.
Important: Make sure the hole in the metal pipe is facing upwards—this is key for proper alignment.

Step 5: Drill and Insert Anchors

Drill holes at the marked points, then insert the provided wall anchors. Wipe the area clean of dust and pencil marks.

Step 6: Mount the Bracket

Screw the metal bracket to the wall using the included screws. Make sure it’s secure and level.

Step 7: Attach the Wood Sleeve

Slide the wooden sleeve (attached to the product) onto the wall bracket. Align the hole in the pipe so that it’s at the top.

Step 8: Secure and Straighten

Insert and tighten the top screw to connect the wooden sleeve to the bracket. Finally, straighten the ropes so the product hangs cleanly and evenly.

For support, reach out to us at info@modu-design.com