Follow these simple steps to install your artwork safely and correctly.

Step 1: Unbox Carefully

Open the package and gently remove the artwork. Place it flat and straight on a table.

Tip: Lay down a soft cloth first to protect the glass beads from scratches or damage.

Step 2: Locate the Wall Bracket

Find the metal bracket inside the wooden sleeve included in the packaging. Choose the spot on the wall where you want to hang the artwork.

Important: For the Large version, maintain a minimum of 5 feet of unobstructed space below the installation point to allow proper clearance for the artwork  for Medium version, 3.5 feet are recommended.

Step 3: Mark the Holes

Hold the bracket against the wall and mark the screw holes with a pencil.

Important: Make sure the hole in the metal pipe is facing upwards like in the image below, this is key for proper alignment.

Step 4: Drill and Insert Anchors

Drill holes at the marked points, then insert the provided wall anchors. Wipe the area clean of dust and pencil marks.

Step 5: Mount the Bracket

Screw the metal bracket to the wall using the included screws. Make sure it’s secure and level.

Step 6: Attach the Wood Sleeve

Press the wooden sleeve firmly onto the wall bracket until it fits securely in place. Align it so the hole in the pipe is pointing upward.

Step 7: Secure and Straighten

Insert and tighten the top screw to connect the wooden sleeve to the bracket. Finally, straighten the ropes so the artwork hangs cleanly and evenly.

Tip: It’s best to have an extra set of hands to support the rope and the weight of the glass while you screw in the wooden sleeve. Once secured, make sure the rope is wrapped neatly around the sleeve.

Step 8: Arrange the Glass Beads

Once the artwork is securely installed, use the small Allen key from your accessories bag to adjust the position of each element. Spread the glass beads evenly to your liking.

Tip: If you’d like to recreate the arrangement shown on our website, follow the measurements indicated in the drawing below.