Looking Loops Installation Guide

Preparation

Step 1: Clean the Wall
Wipe the wall with a dry cloth to remove any dust or debris.

Step 2: Prepare the Template
Unfold the paper template and make sure the top arrows are pointing in the correct direction.

Step 3: Secure the Template
Use painter’s tape to attach the template to the wall, making sure it is straight by aligning it with the printed guide lines.

Tip: A leveling app on your phone can help improve accuracy.

Installation

Step 4: Apply the Protective Leaf
Peel the backing off the adhesive protective leaf and place it over the openings in the template according to the composition you purchased.

Step 5: Insert the Magnet
Place the included magnet inside the square area of the protective leaf.

Step 6: Secure the Adhesive
Press firmly and hold for at least 30 seconds to ensure proper adhesion.

Step 7: Repeat
Repeat Steps 4–6 for all magnets.

Finishing

Step 8: Remove the Template
Confirm that all magnets are correctly positioned, then gently remove the paper template from the wall.

Step 9: Attach the Mirrors
After waiting at least 1 hour for the adhesive to fully set, attach the mirrors by gently placing them onto the magnets and allowing them to connect naturally.

For support, please reach out to us at info@modu-design.com