Majolica Installation Guide

Preparation

Step 1: Clean the Wall: Wipe the wall with a dry cloth to remove dust and debris.

Step 2: Prepare the Template: Open the paper template and ensure the top arrow is pointing in the correct direction.

Step 3: Attach the Template:

• Peel off the stickers from the template

• Stick the template on the wall, ensuring it is straight by using the printed lines.(Tip: Use the included level tool or a leveling app on your phone for accuracy.)

Method 1: For Smooth Walls (Adhesive only Method) attach the Hanging Brackets:

Step 1: Peel the backing off the adhesive on a bracket.

Step 2: Place the bracket inside the template cutout, ensuring the opening faces up and aligns with the bottom left corner of the template.

Step 3: Press firmly for at least 30 seconds.

Step 4: Repeat for all brackets.

Step 5: Insert nails through the brackets using a hammer for extra support.

Method 2: For Rough or Textured Walls (Screw Method) Mark the Screw Positions:

Step 1: Without peeling the adhesive backing, place the bracket in the template cutouts and mark the hole positions.

Step 2: Drill the Holes by using a 6 mm drill bit to create holes where marked.

Step 3: Insert wall plugs until they are flush with the wall.

Step 4: Screw in the brackets until firmly attached.

Note: The adhesive will strengthen over time. You can twist parts slightly to make quick adjustments right after installation, but we recommend avoiding any movement for at least 24 hours.

For support, reach out to us at info@modu-design.com