Mirage Installation Guide

Install your Mirage product quickly and easily with the included template. No tools required and no wall damage.

Step 1: Unfold the Template

Gently unfold the cardboard template until it lays completely flat.

Step 2: Choose the Spot

Pick the perfect spot on your wall. Make sure the ‘TOP’ marking on the template is facing upward.

Step 3: Clean the Wall

Wipe the area with a dry cloth to remove any dust—this helps the adhesive stick more securely.

Step 4: Attach the Template

Peel off the backing of the 4 stickers on the template. (do not pull from the arrows) Use the included level tool to make sure it’s straight, then press the template flat against the wall.

Step 5: Place the Parts

Each part has a letter on the back.
Find the matching letter on the template, then gently peel the backing sticker (avoid pulling on the arrows). Press the part firmly into place.

Step 6: Remove the Template Stickers

Once all parts are mounted, pull the arrowed tabs on the stickers to gently remove them—this ensures no damage to your wall.

Step 7: Remove the Template

Grab the pull tabs at the center and carefully slide the template off the wall, leaving the parts in place.

Note: The adhesive will strengthen over time. You can twist parts slightly to make quick adjustments right after installation, but we recommend avoiding any movement for at least 24 hours.

For support, reach out to us at info@modu-design.com